DIY Modern Easy Craftsman Window Trim

Craftsman Window Trim – Hi, close friends! It’s Lauren from Bless’ emergency room Home, as well as I’m enjoyed be back sharing more DIY goodness from our latest house wrongdoings.

DIY Modern Easy Craftsman Window Trim

If you have actually never seen my little corner of the internet, my partner and also I are on a goal to bring great deals of personality and also appeal to our extremely fundamental builder box house.

This time around 2 years ago, our living room appeared like this:

DIY Modern Easy Craftsman Window Trim

Considering that starting our homeowning trip, we’ve discovered that the leading three ways to change a room in a substantial method is with paint, lengthy curtains, as well as building information.

We already took on the paint as well as curtains part in 2014, when we threw our Do It Yourself synthetic fireplace right into the mix, the room instantly looked 10 times larger! Yet something it was missing out on in the personality department- window trim.

So we determined it was time to fix that.


Incidentally, Pandora radio is an essential in any type of Do It Yourself task at our residence. Turn on some 80s jams, make it a day, and also reach fixing up the place.

Aside from your songs, here’s just what you’ll need.

Simple DIY Craftsman Window Trim

Materials checklist:

( The below supplies are exactly what you’ll require for one conventional 35.5 ″ x 59.5 ″ window.).

  • 1 ″ x2 ″ x8 ′ board.
  • 2- 1 ″ x4 ″ x8 ′ boards.
  • 1 ″ × 6 ″ x8 ′ board.
  • 2-in brad nails.
  • Wood screws.
  • Mix square device.
  • Pencil.
  • Hammer or nail weapon.
  • Drill.
  • White trim caulk.
  • Timber filler.
  • Great grit sandpaper.
  • Paint (I used Sherwin Williams Pure White to match our fireplace as well as baseboards.).
  • Jigsaw.
  • Circular saw or table saw.

We had five home windows to add trim to, so we had a fair bit extra wood than just what remains in that listing. The most effective part though is this calls for really elementary woodworking abilities, so this is an excellent job if you’re a newbie in the house improvement. No complicated angled cuts!

The Actions:.

1 – We started by developing the header first as well as determined the top size of our window then added 10 inches to that measurement to enable a 5 inch overhang on each side of the window.

We noted that dimension on a 1 ″ x6 ″ board utilizing the square device to note a straight line.

Then, utilizing our round saw, we cut the 1 ″ x6 ″ board.

We used the exact same dimension from our 1 ″ x6 ″ to mark and also reduce 2 pieces of 1 ″ x2 ″ boards. Given that we had 3 home windows gathered with each other to earn one large window, we worked from a 12 foot length board.

As soon as the 1 ″ x2 ″ s were reduced, we connected them to each side of the 1 ″ x6 ″ board with wood screws (as revealed listed below).

Our header needed to be long for our huge window, and also because we couldn’t locate 1 ″ x2 ″ x12 ′ boards, we needed to reduce and affix our 1 ″ x2 ″ s in 6 items to the longer 1 ″ x6 ″ x12 ′ board.

Then we had our header!

When we focused our new header over the windows, we nailed them right into area. We utilized a great ol’ made hammer because the size of our nails wouldn’t operate in our nail weapon.

Lookin’ much better already, right?

2 – Following section was the window sill. We worked with this larger window in thirds also. Your entire window sill ought to coincide length as your header was.

We noted the size we required for the sill on an additional 1 ″ x6 ″ board and also cut using our round saw.

After that, making use of the freshly reduced 1 ″ x6 “board, we noted on the wall where the sill should finish (5 inch overhang) and also held up the board to mark the window’s edge.

We gauged the window’s deepness as well.

We noted those 2 measurements (the window’s size as well as depth) on the 1 ″ x6 ″ board.

Using our square tool once again, we marked the straight lines in between the measurements.

Then quit with a jigsaw.

After our cuts, below’s exactly what our 1 ″ x6 ″ board appeared like.

We fit our freshly cut 1 ″ x6 ″ board into location as well as nailed it in to form our window sill.

3 – To earn the sides of the window, we utilized 1 ″ x4 ″ boards.

We simply determined the height in between the bottom of the header (from action 1) and the top of the sill (from step 2) to understand at what size to cut the 1 ″ x4 ″ board.

In collaborating with our large window, the two areas in the center of our three windows were a little larger than a 1 ″ x4 ″ board at 4.74 ″. So we needed to cut two 1 ″ x6 ″ boards lengthwise making them the precise size we required.

We lined the sides up on the side of the windows as well as toenailed them right into area.

4 – For the last carpentry action, we included our apron (the wood piece below the window sill).

We gauged the size from the outside side of the 1 ″ x4 ″ side piece to the various other outside side of the 1 ″ x4 ″ side piece to locate for how long to cut the 1 ″ x4 ″ board for the apron.

If you’re an aesthetic person, this may assist to show you exactly how we developed the trim for our larger window.

5 – After that caulk like crazy! Likewise referred to as a woodworker’s friend.

Caulk all of the joints and fill the nail openings and knots with wood filler. Let completely dry and sand till smooth.

6 – Finally, painting all of your new trim. We did two layers of guide+ paint in one.

We made use of the situation by tricking out … emergency room … cutting out our dining room window also.

After we put our curtains back up, I was impressed at the distinction it made! It resembles our windows were destined for Craftsman trim the whole time.

Our windows look stunning with our fire place too. Soon, we’ll be placing an area rug in below making this area ended up. And I intend to put beam of lights on our ceiling ultimately, yet I could be pressing my good luck there.

As you can tell our canine, snoozing on the back of our seat there, is very pleased.

You could see even more resources and Dos it yourself from this room over on Bless’ emergency room Home.

Exactly what do you think? Something you might attempt? Trimming out windows really is a large area changer. I can’t wait to deal with the rest of our upstairs home windows with it.

How to Install Craftsman Style Window Trim Part 2

When we purchased our Minneapolis house 7 years ago, it was pretty plain. The house was full of common features and really did not have any type of individuality. Throughout the last couple of years, we have actually been slowly updating the home to highlight our character as well as generate higher-end customized jobs to raise our residence’s worth. This procedure has actually instructed us that also the apparently tiny jobs make a big influence in your home.

As part of our master collection remodel, we’re updating all of our window trim from the boring, basic design to a beautiful Craftsman Style trim that is truly high-impact.

Ways To Install Craftsman Design Window Trim.

There are many different designs of upgraded window trim that you could relate to your home windows. Justin & I are mosting likely to reveal you exactly how we set up a streamlined Craftsman Design trim that brings a modern planning to our residence. We’ll be sharing each action with you, so while this could look complicated– we understand you could do it!

Materials Needed:


Tools Needed:

  • Fingernail Weapon, Trim Gun, or Brad Nailer.
  • Leader or Moving T-Square.
  • Drill/Driver.
  • Wood Glue.
  • Miter Saw.

Currently let’s begin!

Begin by getting rid of the existing window trim utilizing a crowbar. Attempt your best to not pierce or damage the sheetrock bordering the windows while you’re getting rid of.

How you can install Craftsman Style Window Trim|House Upcoming for

When our existing trim was removed, we discovered that the expansion jam of the window (also known as. the wood structure that borders your window) wasn’t vast enough due to the fact that it wasn’t broad enough to fulfill our Sheetrock.

Woodworker’s Pointer # 1:

The extension jam around your window needs to be flush with your wall surface prior to the trim could be applied. Since our jam was too small, we built a new jam with 1 ″ x4 ″ want, which was determined and reduced to fit.

Carpenter’s Pointer # 2:

To avoid the product from splitting, you have to pre-drill holes making use of a 1/8 ″ drill little bit (this can be made use of on a normal drill). After that after the openings have actually been pre-drilled, screw the expansion jam right into the window frame making use of a 3 ″ trim head screw as well as your influence drill.

Woodworker’s Pointer # 3:

Before mounting your trim, measure 1/4 ″ from the edge of your window expansion jam to be revealed for the split appearance we’re choosing. We made use of a moving t-square to measure this in several points on our jam, which we then utilized as an overview when setting up the trim.

Also, reducing a scrap of our 1 ″ x 4 ″ side pieces (also known as case), we held it in position and also noted the outdoors edge in order to help us identify the action for the Head Item.

Starting with the 5/4 ″ x 6 ″ head item of pine, we gauged and also reduced the board to be 3/4 ″ longer than the window casing (that we simply marked) on each side. Secure in place using 2-1/2 ″ trim nails as well as your surface nailer.

After that, for the layered appearance, we included the yearn 2 ″ x 2 ″ on the top, cut to be 3/4 ″ longer than the head piece. Secure into location making use of timber glue & trim nails.

Woodworker’s Idea # 4:

Wood adhesive is your buddy! Make certain to use timber glue to every wood-to-wood contact. This will certainly provide a more safe and secure and lasting hold.

After that we moved on to the sill & apron (aka all-time low) of the window. The 1 ″ x 4 ″ apron must coincide size as your Head item, which was 3/4 ″ longer than the window casing on each side.

Woodworker’s Pointer # 5:

Install your apron prior to your sill to earn it less complicated to toenail and secure whatever in place. We used a scrap piece of wood at the same thickness as our sill (5/4 ″) to establish the proper elevation of the apron prior to safeguarding.

Note: If your sill item is flush with the Sheetrock, you do not have to put on a miter return (the angled corner piece that returns to the wall) on if you’re planning to paint your sill. You could instead make use of a square cut item of ache and also miss the next step listed below. If you’re planning to stain your sill, then comply with the instructions listed below make certain that there’s no end grain proving.

Cut a 45 level angle using your miter saw on each end of your 5/4 ″ x 2 ″ sill as well as affix to the apron. Affix by applying wood glue, then toenailing in place. Step the range from the long factor of your angle to the wall– you’ll require this measurement in a second.

Gluing the Sill

After that reduce your return piece (aka. the smaller sized piece of wood that completes the edge) at a 45 degree angle on one side of the piece, and a square cut on the other side utilizing your lengthy factor measurement. Affix by using wood glue, then fingernailing in position.

Lastly, measure between your head item and also your sill item and also reduce your 1 ″ x 4 ″ casing to that length for the side items. Glue completions where they fulfill the sill and header, as well as attach the casing to the expansion jam (making use of 1-1/4 ″ brad nails) as well as wall surface (making use of 2 ″ trim nails).

Last Window Sill and also Apron.

As well as, the hard component is done! (Completely seems tougher compared to it is.) The rest is completing touches.

Load all the nail openings utilizing wood filler, allow to dry, after that sand smooth.

Carpenter’s Tip # 6:

” Damage the edges” by rounding somewhat with sandpaper. This trick not just soften the edges yet will also aid the paint stick on the brink.

After that paint or stain & poly your window trim based on your style selections. We preferred to repaint our window trim white to match our shade palette.

Woodworker’s Idea # 7:

The last pointer is to constantly apply a bead of caulk on every joint of the trim– inside edges and out– when you’re painting your trim. This will give it an extra completed look and conceal any imperfections and/or voids in between each piece. Regrettably, if you’re staining your trim, this suggestion doesn’t use because the caulk would certainly reveal.

That’s it! Right here’s a last image of our Craftsman Style window trim before being primed, repainted and caulked.

And below it seeks being topped, paintinged and caulked.

Big impact, right?

If you wish to know even more about us, adhere to along on our house remodel or see the DIY tasks we’re dealing with, swing by House Upcoming for a check out!

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.